TOOLS YOU'LL NEED:
- Tape Measure
- J Roller
- Jig Saw
Step 1: Measure & Mark
Use a tape (or by reference) to determine the width of the plank you need to rip.
Step 2: Draw Your Rip Line
Using any kind of straightedge or level, draw your rip line from the mark you made when measuring.
Step 3: Rip Stikwood
Depending on the length of your piece , Stikwood can be ripped to width with either a jigsaw, utility knife, or a table saw. Start your rip from the mark and follow the line.
Step 4: Dry Fit and Install
Before installing your ripped piece, dry fit the Stikwood into place. Dry fit means assembling the piece(s) of a project to check their fit before application. If the piece fits, remove the adhesive strips and install. Secure your piece into place with the J roller.